Important Notice!
Important Notice Regarding Similar Looking Products
FAQ | Contact Us | Membership

Click here to enlarge
Skill Level - Advance
Send this link to your friend!




(press once)
Supplies:
* Makin's Clay®
  • small amount of Green Clay
  • small amount of Terra Cotta Clay
  • small amount of Red Clay
  • 2g Black Clay
  • 2g Yellow Clay
  • 2g White Clay
  • 15g Blue Clay
  • 120g Brown Clay
  • 240g Natural Clay
  • Any Favorite color / colors
  • Recommended Makin's® Tools:
  • Chisel
  • Mallet
  • Roller
  • Roller & Cutter
  • Clay Mixing Ruler™
  • Clay Gun Extruder
  • Clay Cutters (Round - large and small size) (Square - large size)
  • Texture Sheet (Wave)
  • Other Materials:
  • White glue
  • Scissors
  • Ruler
  • Straws (diameter: 10mm )
  • Toothpicks
  • Acrylic Paint
  • Paintbrush
  • Brush
  • Method:
      1. Roll natural clay into a 120mm x 120mm sheet and roll Makin's Texture Sheet (Wave) over the top with Makin's Roller. Cut sheet into shape with Makin's Cutters and Roller Set. Cut out Windows with Makin's Clay Cutter Set (Square).
      2. Following the size of the front, roll and cut a piece of natural clay sheet into correct size and add strips on it to make backing of frame.
      3. Use Makin's Clay Extruder to extrude two navy blue ropes and twist into a helix. Repeat with two more ropes and twist in the opposite direction as before. Place on roof as shown in diagram.
      4. Roll olive colored clay into a sheet and cut with Makin's Clay Cutter Set (Circle) as shown in diagram. Texture with Makin's Chisel. Roll olive colored clay into a long string and cut into smaller sections as shown in diagram. Mark one end with two stripes with Makin's Mallet.
      5. Roll terra cotta cay into long ropes and cut into sections, then lay together as shown. Assemble all parts together from steps 4 and 5 then secure with glue.
      6. Roll white clay into the shape of a lifesaver. Roll and cut plum colored clay into small rectangular sheets and wrap them around lifesaver as shown. Extrude light brown colored clay with Makin's Clay Gun Extruder to make a rope. Wrap rope around the lifesaver.
        7. Roll gray colored clay into ropes to make the anchor. Cut two small triangles of light brown colored clay and attach to anchor as shown. Wrap black clay around the arms of the anchor and place of a small into the depression.
        8. Assemble pieces and secure with glue. After drying, paint with acrylics to add color and tone.
     
    Designed by - Dorothy Chan, MAKIN'S CLAY® Design Team
    ©2018 Sino Harvest Ltd. All rights reserved.