| Method: |
| |
|
 |
1.
Roll two ropes of brown clay then flatten with a ruler.
Cut clay into four pieces as shown in the diagram. |
| |
|
 |
2.
Pin holes into the surface with Makin's Chisel as shown
in the diagram. |
| |
 |
 |
3.
Roll
clay into a thin sheet with Makin's Roller then cut into
a rectangle for the banner. Texture with Makin's Chisel
then bend along the edge of a round box. |
| |
 |
 |
4.
Use Makin's Chisel to pin words into the banner and leave
it to dry. After drying, paint with acrylics. |
| |
|
 |
5.
Roll two sheets of clay with Makin's Roller then cut into
40mm x 40mm squares with Makin's Mallet. Indent nine holes
into square with a round-ended pen. |
| |
|
 |
6.
Cut four pieces of wire about 10mm long, then add glue
onto the end and insert into the clay as shown. Leave
it to dry. |
| |
|
 |
7.
Make eighteen small eggs with light colored clay. Glue
them into place on the plate with glue. |
| |
 |
 |
8.
Assemble shelves as shown with the top shelf slightly
tilted. Keep it on the side until it has dried. |
| |
|
 |
9.
Stick the banner onto the top of the shelf with glue. |
| |
| Designed
by - Dorothy Chan, MAKIN'S CLAY® Design Team
|
